Baumr‑AG 62CC Petrol Chainsaw 20″ Commercial Bar with E‑Start
A practical, no‑nonsense review and user guide for Australians who need reliable cutting power for property care, storm clean‑ups, and firewood—without the premium price tag.
Last updated: 15 August 2025
Overview
The Baumr‑AG 62CC petrol chainsaw pairs a punchy two‑stroke engine with a 20‑inch commercial bar, assisted E‑Start recoil, and sensible safety features. It’s built for property owners, rural households, and volunteer crews who need dependable cutting performance for firewood, wind‑thrown limbs, and fence‑line maintenance. In short: plenty of capacity, fair weight, and good value.
If you’re preparing for the Australian fire season, this saw suits fuel reduction around homesteads—trimming medium logs, sectioning fallen branches, and producing a steady stack of hardwood. Tradies will appreciate the balance between cost and output, while emergency‑minded users will value a tool that starts consistently and runs cleanly with routine care.
Key Features
62cc two‑stroke power
Delivers confident torque for cutting ironbark, red gum, and messy storm debris.
20″ commercial bar
Balanced reach for accurate bucking and limbing without excess weight.
E‑Start assisted recoil
Reduces pull effort and speeds up restarts when working stop‑start tasks.
Inertia‑activated chain brake
Rapid chain stoppage during kickback events for safer operation.
Auto chain oiling & anti‑vibration
Smoother cuts and less fatigue over longer sessions.
Tool‑assisted chain tensioning
Simple adjustments keep performance crisp and safe.
How It Works
This saw uses a carburetted, air‑cooled, two‑stroke engine. Mixed fuel (petrol and two‑stroke oil) powers the cylinder; combustion drives the crankshaft; the clutch engages the sprocket to rotate the chain around the 20″ bar. E‑Start assistance reduces the pull force on start‑up, while a primer bulb and choke help achieve a rich mixture for a cold start.
- Check chain tension and bar oil level.
- Set choke/primer as per temperature, engage the throttle lock, and ensure the chain brake is on.
- Pull start until it coughs, push to half‑choke, then start and warm up.
- Release the chain brake before cutting. Maintain full throttle for clean chips, and let the saw work.
Benefits & Advantages
For Australian conditions, the Baumr‑AG 62CC petrol chainsaw hits a sweet spot. It’s strong enough for most domestic hardwoods and responsive enough for tidying wind‑thrown limbs after summer storms. The anti‑vibration design lowers fatigue, and the E‑Start system helps users who struggle with traditional recoil starters.
- Preparedness: Ideal for creating defensible space, clearing ladder fuels, and cutting firewood heading into fire season.
- Versatility: One saw for bucking, limbing, and occasional felling of modest‑diameter trees.
- Value: Competitive price with accessories often included (bar cover, basic tools).
Limitations & Safety Considerations
- Weight & fatigue: A 62cc saw is heavier than small homeowner models; plan breaks and rotate tasks.
- Kickback risk: Keep the chain sharp, use the bumper spikes, and avoid tip contact. Engage the chain brake whenever moving.
- Fuel handling: Premix at the recommended ratio; store fuel in approved containers away from heat.
- Dust & noise: Wear hearing protection and a P2/P3 respirator when cutting dry hardwood or in dusty conditions.
- Bar length limits: A 20″ bar is versatile but not for very large trunks—step up a class for frequent heavy felling.
Always maintain a clear stance, use two hands, and never cut above shoulder height. In fire‑prone areas, avoid hot‑work during Total Fire Ban days and carry water/knock‑down gear.
User Scenarios
1) Rural household preparedness
Before summer, you clear low branches and cut stored firewood. The 62cc motor keeps pace with dense gum, and the 20″ bar reaches through larger rounds without binding. Sharp chain, steady throttle, and a splitting block make the job efficient and safer.
2) Volunteer brigade clean‑up
After a wind event, crews section fallen limbs across back roads. E‑Start helps multiple users get the saw running quickly. With PPE and a lookout in place, the team buck sections into manageable lengths for loaders to shift.
3) Tradie on acreage
A fencing contractor cuts posts and clears scrub. The saw’s balance and auto‑oiler keep the chain lubricated in dusty paddocks. Daily cleaning and a spare sharp chain keep productivity high.
Maintenance & Care Guide
Daily (before/after use)
- Check chain tension (snug on bar, pulls down to expose 1–2 drive links).
- Fill bar oil and inspect for leaks.
- Clean air filter; tap out dust and replace when clogged.
- Inspect chain brake function and throttle lock.
Weekly
- Sharpen chain (consistent depth gauges, even top plates).
- Rotate or flip the bar to even wear; dress the rails if burred.
- Check AV mounts and fasteners for play.
Seasonal
- Replace spark plug per schedule; inspect fuel lines.
- De‑gum carburettor with fresh fuel and stabiliser after storage.
- Replace chain/sprocket when elongation or hooking appears.
Store the saw drained or with treated fuel, bar cover on, and out of direct sun. Keep a log of hours and parts used—small habits add years to service life.
Comparison Table
| Model | Engine / Bar | Best for | Pros | Trade‑offs |
|---|---|---|---|---|
| Baumr‑AG 62CC (this review) | 62cc / 20″ | Preparedness, property care, firewood | Good power, E‑Start, strong value | Heavier than small homeowner saws |
| Mid‑range 58cc competitor | ~58cc / 20″ | Occasional cutting, lighter users | Slightly lighter, agile | Less torque in dense hardwood |
| Pro‑class ~70cc saw | ~70cc / 20–24″ | Frequent felling, heavy bucking | Highest output, durable cases | Higher price, more weight & fuel use |
Ready to power through hardwood?
Check current pricing and availability for the Baumr‑AG 62CC with 20″ commercial bar.
FAQs
What fuel mix should I use?
Follow the manufacturer’s ratio for two‑stroke oil to petrol (commonly 1:40 or 1:50). Use fresh fuel and a quality fully‑synthetic two‑stroke oil for cleaner running.
How often should I sharpen the chain?
Touch up after each fuel fill if cutting hardwood. If chips become dusty or cutting wanders, sharpen immediately and check the rakers.
Can beginners use a 62cc saw?
Yes—with proper PPE, training, and respect for kickback zones. Practise stance and braking before tackling larger rounds.
Is a 20″ bar right for me?
It’s a versatile length for most property work. For frequent big timber, consider a higher‑cc saw and longer bar; for lighter pruning, a smaller saw may suit.
What oil do I use in the tank near the bar?
That reservoir is for bar and chain oil. Use a quality product so the oiler can feed consistently in warm temperatures.
How do I reduce fatigue?
Sharpen often, let the saw pull itself, keep your elbows down, and switch tasks. Anti‑vibration mounts help, but technique matters most.
Baumr‑AG 62CC Chainsaw
Compact card with direct link to a current offer. Check accessories and delivery options.
Where to Buy (Australia)
- Edisons (Official) — Often stocks bundles with bar cover and tool kit.
Links & Manuals
- Manufacturer & product support — Manuals, parts, and accessories.
- WorkSafe Victoria: Chainsaw guidance — Safety practices and PPE requirements.
- Safe Work Australia — National WHS resources and standards.
Credits & Review Notes
This hands‑on review and guide draws on Australian field use, maintenance best practice, and current preparedness guidance. Our goal is practical advice for homeowners, volunteers, and tradies—clear, safe, and grounded in real‑world tasks.
Disclosure: If you purchase via links on this page, we may earn a small commission that helps keep this resource free. This does not affect our editorial independence.
Emergency Contacts — Australia
- 000 — Life‑threatening emergencies (Fire, Police, Ambulance)
- SES 132 500 — Storm & flood assistance
- Vic Emergency — Warnings & incidents
- Bureau of Meteorology — Weather & fire weather updates
Quick Maintenance Tips
- Sharpen little and often; carry a spare chain.
- Keep bar oil full; check oiler by pointing at a clean surface and revving briefly.
- Clean the filter every session; replace if torn or clogged.
- Flip the bar each week of use; replace worn sprockets with the chain.
For Professionals
Adopt a JSA before cutting, enforce exclusion zones, spot hazards (tensioned branches, spring poles), and stage a secondary saw. Carry wedges, scrench, depth‑gauge tool, and first‑aid kit with haemorrhage control. Rotate operators to manage fatigue.
Disclaimer: Always follow safety protocols and formal training when using cutting equipment. Local regulations and Total Fire Ban rules apply.
